General Finishes DEAD FLAT Water-Based Top Coat

New patented polymer technology provides an ultra-flat sheen without the compromise in durability

Until now, flat-sheened polyurethanes came with a compromise in durability. But thanks to brand-new patented polymer technology, General Finishes High Performance Dead Flat provides every bit as much durability as their High Performance Satin, and a huge improvement over the older Flat Out Flat. For woodworkers looking for an ultra-flat topcoat that is just as durable as the other sheens, High Performance Dead Flat is the topcoat to turn to.

High Performance Dead Flat Details:

• Dead flat polyurethane topcoat with patented polymers to retain durability
• Fast-drying, water clean-up, no odor, low VOCs
• Dries perfectly clear, with no amber cast
• As durable as High Performance Satin, and far more durable than Flat Out Flat
• Tested for water resistance, chemical resistance, scratch resistance and marring
• Uses renewable resources, with no Prop 65 chemicals
• Meets KCMA standards; VOC compliant nationwide

• Cleanup: Water
• Cured Color: Water White (dries clear)
• Base Type: Water
• Sheen: Dead Flat (<5)
• Interior or Exterior: Interior only
• Application Method: Brush, roll, spray
• Spray Tip Sizes: HVLP 1.1mm-1.3mm
• Dry Time - Touch: 30+ min.
• Dry Time - Recoat: 2+ hr
• Dry Time - Light Use: 7-10 days
• Dry Time - Full Cure: 21 days
• Coverage: 65-75 sq.ft./pint, 125-150 sq.ft./quart, 500-600 sq.ft./gallon
• Durability (Highest, High, Medium, Low): High
• Hardness (Koenig #): 59

Warning: Do Not Mix! Topcoat with a Dead Flat sheen CANNOT be mixed with another sheen because a completely different polymer is used and the combined formulas will not perform well as one.

16oz Pint